Precipitated silica is a synthetic, amorphous silicon dioxide made by precipitating silica from a sodium silicate solution with acid, then washing, drying and milling it. Its value comes from a porous, high-surface structure that can carry liquids, keep powders flowing, matt a coating or open a film. Buying it well means choosing a grade by the job it has to do in your process and proving it on your own line, not comparing price per tonne.
Precipitated silica is amorphous silicon dioxide (SiO2) produced in a wet chemical process. It is not ground sand or quartz, which are crystalline, and it is not fumed silica, which is made in a flame from silicon tetrachloride. Under the electron microscope a precipitated silica particle is an agglomerate of very small primary particles, and the voids between them create the internal surface and pore volume that make the material useful.
That structure explains why one chemical family turns up in such different places. The same basic material that absorbs choline chloride in a feed premix can, in a different grade, reduce gloss in a wood lacquer or create micro-roughness on the surface of a packaging film. What changes from one grade to the next is not the chemistry but the physical architecture — and, for some grades, a surface treatment.
The general route is well established across the industry:
Sodium silicate solution is reacted with an acid, usually sulfuric acid, under controlled temperature, pH and dosing. These conditions set the size of the primary particles and how they build into aggregates.
The silica slurry is filtered and washed to remove the salt formed in the reaction. Washing intensity affects residual salt content and, for sensitive applications, purity.
The filter cake is dried. The drying method influences whether the product ends up as a fine powder, a more compact form or a granule.
The dried silica is milled and classified to the target particle size. Some grades are then surface-treated — for example with an organic treatment for resin compatibility, or made hydrophobic for oil-based systems.
For a buyer, the point is that each step is a control lever. Two products both called precipitated silica can behave very differently on your line because they were precipitated, dried, milled or treated differently. That is why grade selection has to be confirmed on your process rather than on a name.
No single number describes a precipitated silica grade. The useful approach is to know which properties matter for your job and to read them from the controlled TDS and lot COA:
We do not publish brochure typical-value tables. Final values for any grade follow the supplier's latest TDS and the lot COA, and the real answer comes from your own trial — liquid loading and flow in a premix, gloss and haze on a dried film, opening force and COF on a film sample.
The CENSIL grade family covers 18 grades. Not all of them are listed as precipitated silica — the family also includes porous silica-based materials, a high pore-volume grade, hydrophobic silica and high-absorption silica powders — so the table below covers only the grades listed as precipitated, grouped by the job each is positioned for.
| Job in your process | Precipitated grades | How they are positioned |
|---|---|---|
| Liquid carrier, flow aid and anti-caking | CENSIL 260P, 265P, 280P | 260P is the base carrier when flow and caking are the real problem; 265P takes more liquid while staying free-running; 280P is the high-loading candidate for choline chloride, organic acids and other demanding liquids. Used on the feed, agrochemical and (260P) food powder tracks. |
| Coating matting and rheology | CENSIL 230W, 525L, 560N | 230W is specially treated for waterborne compatibility; 525L is organically treated, the general-purpose matting route; 560N is untreated and balances matting, rheology, anti-settling and cost. |
| Film antiblock | CENSIL 773, 779, 185P | 773 and 779 are low-iron, high-purity grades for film where optics matter; 185P is the conventional comparison route when cost position is part of the decision. |
| Masterbatch feeding and dispersion | CENSIL 165GR, 185GR, 779 | Granular grades for feeding stability and dust control, with 185GR at a higher surface-area position; 779 is the powder route where the downstream film is judged by eye. |
If you start from the application rather than the product, the solutions overview maps each application track to its lead grades and validation metrics, and the product selector narrows the choice by application and system.
Most failed silica switches come from buying a grade name or a price, not a result. A short, disciplined process avoids that:
Write down the application, the current material, the formulation, resin or system, the equipment and the one or two metrics that decide success — for example flowability after storage, target 60° gloss, or opening force at a given haze.
Shortlist one to three grades from the job they are positioned for, including a comparison route where cost matters.
Run the samples beside your current material on your own line or lab method. Measure the same metrics the same way so the comparison is fair.
Confirm that the TDS, COA and SDS that come with the sample are the ones that will govern supply, and that any use declaration you need covers the specific grade.
Every CENSIL grade is supplied with a controlled TDS, a lot COA — every production lot is tested before it ships — and an SDS in the destination language where required. Depending on the application, the document set can also include food-contact, feed-material, cosmetic or industrial use declarations and third-party reports such as heavy metals or microbiology.
For the material class, the commonly cited references are REACH (silicic acid, precipitated, EINECS 231-545-4), E 551 under Reg. (EU) No 231/2012 and 21 CFR § 172.480 for food-grade material only, the EU Register of Feed Materials, and INCI Hydrated Silica for cosmetics. These describe the material class; whether they apply to a given grade is confirmed on that grade's own document set, so always check the declaration for the exact grade you will buy. The quality page explains how lot consistency is controlled.
Packaging is part of the specification too: 20 kg and 25 kg PE-lined kraft bags and 500 kg or 1,000 kg FIBCs are standard, with bag and FIBC options for the granular grades confirmed per order to protect the granule in transit.
The fastest way to a reliable answer is to bring the process problem rather than a target price. Tell us the application, current material and target metric, and we will come back with a grade direction, samples and the full document set.
Related: All application tracks · Request a sample · All news