Locate a recommended grade direction by application track × process system × key metrics. Buyers can self-serve, then our technical team refines around your process.
Lock the application by track, then read the key metrics, matching grade and typical key specification. This is directional selection — final grades depend on your actual process conditions and test feedback. See the full grade specifications for complete data.
| Track | Application system | Key metrics | Grade | Typical key spec | Solution |
|---|---|---|---|---|---|
| Feed additives | Liquid additive powdering / choline chloride carrier | Absorption · flow · dispersion | CS-C200 | Oil abs. 240–290 g/100g · BET 170–230 m²/g | View → |
| Feed additives | Premix / trace-mineral anti-caking | Anti-caking · flowability | CS-F120 | BET 100–150 m²/g · D50 5–12 µm | View → |
| Food powders | Seasoning / soup anti-caking | Anti-caking · shelf stability | CS-F120 | D50 5–12 µm · 45µm residue ≤0.05% | View → |
| Food powders | Powdered beverage / post-spray-drying | Flowability · dispersion | CS-C200 | Oil abs. 240–290 g/100g · BET 170–230 m²/g | View → |
| Oral care | Cleaning-type toothpaste | RDA · cleaning | CS-A070 | BET 45–90 m²/g · D50 6–12 µm (controlled RDA) | View → |
| Oral care | Thickening / structure | Thickening · paste stability | CS-T400 | BET 350–450 m²/g · oil abs. 260–310 g/100g | View → |
| Agrochemical | WP inert carrier | Absorption · bulk density | CS-WG180 | Oil abs. 200–250 g/100g · bulk 100–160 g/L | View → |
| Agrochemical | WG water-dispersible granule | Disintegration · dispersion | CS-WG180 | D50 12–22 µm · BET 160–210 m²/g | View → |
| Agrochemical | SC suspension concentrate | Anti-caking · rheology | CS-WG180 | BET 160–210 m²/g · anti-caking / rheology | View → |
| Oil refining | Crude oil dephosphorization / desoaping | Residual P · desoaping | CS-OE550 | BET 400–600 m²/g · oil abs. 180–260 g/100g | View → |
| Oil refining | Filtration pressure-drop optimization | Filtration · bleaching earth | CS-OE550 | BET 400–600 m²/g · bulk 350–500 g/L | View → |
| Industrial fluoride removal | Fluoride-bearing industrial wastewater · polishing after precipitation | Fluoride removal · breakthrough capacity | CS-DA300 | ≥ 20 mg F⁻/g · BET 250–350 m²/g · pH 5–7 optimal | View → |